Notes: All a click track on top of any groove. Please note the variables listed below and their defaults.
The subroutines ClickOn and ClickOff are created. These can be used in a song file to enable/disable the clicking for sections using the commands "Call Clickon" or "Call Clickoff".
Notes:
There is NOT a TIME or TIMESIG setting in this groove. We use the existing groove value for that.
Since there is not a "SeqClear" in this file the current groove settings will not be changed. However, the name of the current groove "$_Groove" will be "Click". For this reason, call click before the wanted groove.
Author: Bob van der Poel
Description: A simple click track.
| SeqSize: 1 | Time (beats per bar): 4 |
Variables
| ClickTone1 | The drum tone used on primary beats. Default: ShortHiWhistle | ClickTone2 | The drum tone used on secondary beats. Default: ShortGuiro | ClickPattern | The pattern 1, 13, 123 or 1234. Default: 1 |
Track Name: Drum-Clicktrack1
| Voice/Tones: ShortHiWhistle | Articulate: 90 |
| Volume: 180 | Harmony: None |
| Rskip: 0 | Rvolume: 0 |
| Rtime: 0 | SeqRND: Off |
| Strum: None |